mr-knowitall
mr-knowitall
About
- Username
- mr-knowitall
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
The linkage on the transmission is loose, or you bent the linkage mount. Climb under it and look.
-
The linkage on the transmission is loose, or you bent the linkage mount. Climb under it and look.
-
There's a little shutoff valve on one hose to the heater core right next to the fire wall under the hood. They get rusty and tends to stick. THere is a wire cable going to it that hooks up to the heater controls.
-
There's a little shutoff valve on one hose to the heater core right next to the fire wall under the hood. They get rusty and tends to stick. THere is a wire cable going to it that hooks up to the heater controls.
-
It's a slipping belt at the alternator. When you start your truck, the alternator is trying to recharge the battery before the drive belt has a chance to warm up a little. It's fairly normal with older cars and trucks. You may have a tensio…
-
It's a slipping belt at the alternator. When you start your truck, the alternator is trying to recharge the battery before the drive belt has a chance to warm up a little. It's fairly normal with older cars and trucks. You may have a tensio…
-
Spray the pivot pin on the pedal arm with wd-40 or something.
-
It's a slipping belt at the alternator. When you start your truck, the alternator is trying to recharge the battery before the drive belt has a chance to warm up a little. It's fairly normal with older cars and trucks. You may have a tensio…
-
Spray the pivot pin on the pedal arm with wd-40 or something.
-
Spray the pivot pin on the pedal arm with wd-40 or something.
-
Spray the pivot pin on the pedal arm with wd-40 or something.