Acura Vigor Temperature control module power?
Ok so I took off the dash to replace the evaporator. I put everything back and now the connector that gives power to the temperature control module doesn't have any power. I have plugged (or at least I believe I have) everything back in and everything else does get power except the temperature control module. I have a diagram but its not really helpful, it just says the yellow wire is the one that carries the power but the thing is it has about 4 yellow wires on the connector. Please help me.
Comments
Make sure you didn't pinch any wires during install. Check tie fuse or for any fuse that may be blowen.