how do you hem a scalloped edge?
I am making a Halloween costume in satin that is similar to a ball gown. On the neckline and the sleeve band, she wants a scalloped edge. I did try to use light weight fusible interfacing but it doesn't attach to the satin very well without scorching it. I tried to hem the scallops but that was a total and complete mess! I thought about using felt because the costume is a cartoon character, however, against the satin, it also doesn't look nice. I heard about Fray Check but on satin? Not so sure. Any suggestions? Really appreciate any help.
Comments
I know that your waiting for an answer and not to waist time i'm sending links for you to see which one gives you the best help
The Scalloped Hem - Threads - Threads - For People Who Love ...
And narrowly hemming scallops is difficult, to say the least. So the best way to clean-finish a scalloped edge (short of clean-cutting a fabric that doesn't fray) is to ...
http://www.threadsmagazine.com/item/4984/the-%E2%8... - Cached
disdressed: Scalloped hem skirt tutorial #3: the scalloped hem
Note that the lower edge of the scallop curve should align with the placement of the front hem when you reach the side seam. Adjust if necessary.
http://www.disdressed.blogspot.com/2006/05/%E2%80%... - Cached
How to Make a Perfect Scalloped Edge Shirt | eHow.com
Add a dainty scalloped edge made from embroidery thread to the hem of a shirt or to the breast pocket, button placket or sleeves using the blind hem stitch on your ...
http://www.ehow.com/how_6633322_make-perfect-%E2%8... - Cached
More results from ehow.com »
How to Sew a Scalloped Hem in a Lined Skirt or Dress | eHow.com
A scalloped hem turns even the plainest skirt or dress into something ... When you are finished, you will have the outline of your scalloped hem around the entire bottom edge ...
http://www.ehow.com/how_7345945_sew-hem-lined-%E2%... - Cached
Sewing Success Sewing Blog
Choose one or two places like the bottom of a full sleeve and the bottom of the hem of the garment. Here is how to make a scalloped edge First determine how wide and deep ...
1ststeptosewingsuccess.blogspot.com/2007/07/sewing... - Cached
http://www.vain/ and Vapid: Scalloped Edge Tutorial
... fashion weeks are over, it became obvious to me that the world needs a scalloped edge ... scallop has to be sized so that it fits evenly into the width of the hem ...
http://www.vainandvapid.blogspot.com/2008/10/%E2%8...
If you want soft floppy scallops the finish the edge with a close three thread rolled hem worked on a serger. Sometimes scallops are stiffened with a bit of fishing line or wire threaded into the serged edge. If it's for a child you can't use wire as there's little to do about sharp wire edges. A better idea and far more professional looking: You'll need to face the scalloped edge. That is: sew another scalloped piece of fabric to the edge, right sides together, clip into the sharp inner point of the scallop, notch the curves and then turn and press. It's the only way to make crisp well defined scallops. Without a facing they will be shapeless, even if you use a serger to cut and finish the edges.
Here's the technique described in a bit more detail: Trace the scallops from the pattern and add about an inch to the top. Cut from either satin or a lining fabric and if you use a lining fabric use a low-temp fusible if you want even more crispness. Place the facing to edge, right sides together and sew. pivot at the points with the needle down. After sewing clip notches along the outer curves and clip into the inward point of the scallop. The scallops won't turn out correctly unless you clip and notch Then carefully turn to the wrong side and press using a tool inside the facing to make the scallops curve. A wooden spoon works well for pressing faced scallops and is cheaper than anything at the sewing store.
Here's a quick'n'dirty illustration of how this is done: http://lincatz.tripod.com/sewingscallops.jpg
Cut facings to fit the neck and sleeve.
Tack facing on the garment right sides together.
Sew the scallop shape you want. Trim to the stitch line and turn the facing to the wrong side which leaves the scallop shape along the edge.
In 2 separate steps. you're able to do a classic 3 thread rolled hem, or maybe a 2 thread one, in case you have some thank you to dam your top looper., on purely the serger. Then afterwards, walk your chiffon over to a real stitching device instead, and utilising a similar thread in case you like, (perhaps some effective soft rayon 2 ply embroidery thread may be effective on chiffon) p.c.. out a blind hem stitch on the real stitching device. Make the right this moment stitch component of the stitching device blind hem stitch next on your rolled hem, and permit the zig zag component of it, purely go over the fringe of the before made on the serger; rolled hem. while it does that, it is going to pull on your rolled hem, for each little "chew" on that blind hem stitch, and make it look like a"scalloped rolled hem" - yet with utilising first a serger and then additionally the blind hem stitch on a stitching device too, to get that end scalloped result. in case you like it even somewhat tighter to make much extra stated scallops, you ought to tighten up your stitching device stress somewhat. attempt on a scrap first although, and get your blind hemstitch length adjusted the way you may want- the extra desirable area between the zig zagged bites of the blind hem stitch, the extra desirable scalloped result you get while doing that.